- PLEASE NOTE
- Depending on the school, the secretary or technology facilitator is responsible for contacting Avermedia to initiate equipment exchanges due to faulty equipment.
- Locate Purchase Order from Secretary prior to contacting Avermedia Support.
- SPC300 (AverMedia): 5 year warranty
- 300 (Avermedia: 3 year warranty
- 530 (AverMedia): 5 year warranty
- Verify all of that all of the cords for the visualizer and projector are securely in place.
- Make sure the lens cap is OFF
- Pull the power cord out of the visualizer and then reattach.
- Make sure the switch is set to RGB
- Resuming Default Settings – SPC300 ONLY
- press MENU, then default setting
- press MENU, then ADVANCE, then EXPOSURE, then FLICKER, then try 50 or 60 to see if it makes any difference.
- If that doesn’t solve it, contact Avermedia’s Support team.
Projectors
- PowerLite 83c Multimedia Projector: 3 year limited warranty/90 lamp warranty
FAQ’s
Should I turn off the visualizer between uses?
No. The visualizer doesn’t create much heat and the parts do not wear out quickly, if ever.
Should I turn off (or hibernate) the projector between uses?
Yes. The projector bulbs are expensive ($350 or so) and will where out more quickly with prolonged use. They also get extremely hot and this will also shorten its life span.
How often should I blow the dust out of my projector’s filter?
The filter should be cleaned at least monthly, if not bi-weekly. Schools tend to be very dusty. The dust clogs the projector’s filter which causes the projector to overheat. This shortens it’s life span.
Manuals
Visualizers: 300p.pdf, 530.pdf, spc300.pdf
Projectors: cp-x251_um.pdf, epson_powerlite62c_ug.pdf, epson_powerlite_76c.pdf